Diksia.com - JAKARTA, The latest production motorcycles are now equipped with modern features and technologies, including the Smart Key System, a sophisticated keyless system.
The smart key system has two main functions: It serves as an answer back system and is intended to make it easier for motorists to find the position of the motorcycle in the parking lot within a radius of 20 meters.
In addition, it is also equipped with an immobilizer to increase the security of the motorcycle when parking, since the motorcycle can only start when there is a remote control within 80 cm.
The remote control is an important part of the smart key system, so consumers need to pay attention to several points when caring for it.
The following are tips for remote Smart Key motorcycle maintenance provided by the mechanics at Yamaha main dealer PT Thamrin Brothers who manage the South Sumatra Bengkulu area:
1. Keep the remote key in a place that is easy to find, because most remote key loss problems are caused by consumers dropping the remote key in random places.
As a result, consumers need to replace the remote smart key and the PIN number of the previous remote smart key needs to be re-registered.
2. Save the remote smart key PIN number. If the motorcycle owner does not remember the previous PIN number, he will have to replace a set of smart key systems.
Replacing a number of smart key systems, namely replacing the Smart Unit which contains the remote control and the Starter Generator Control Unit (SGCU).
Replacing a smart key system will disable the old keys, making the motorcycle unusable if the remote control is stolen.
3. Avoid dropping the smart key frequently or immersing it in water, which may damage the remote control.
4. Check the condition of the remote control battery. Normally, the remote control signal connects to the smart unit within 80cm.
If the condition of the remote control battery is not good, it means the range of the remote control smart key to start the engine is less than 80cm.
5. Consumers usually forget how to turn on and off the remote control key. To turn on and off, press the remote control smart key for 3 seconds.
If the remote control smart key indicator light flashes quickly, it means the remote control smart key is on. On the other hand, if the indicator light is on slowly, it means the remote control smart key is off.
6. Do not place the smart key remote control close to other electronic devices such as TVs or mobile phones, as the remote control signal may be disturbed.
7. Use an emergency manual key, which can be used to open the motorcycle trunk when the remote control key is lost and the consumer wants to retrieve items in the trunk.
8. If there is any problem with the smart key, contact an official repair shop immediately.
